The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.
The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.
And this is why people wanted headphone jacks… and also why corporations didn’t want them.
I mean, there were legitimate technical issues with the standard, especially on smartphones, which is where they really got pushed out. Most other devices do have headphones jacks. If I get a laptop, it’s probably got a headphones jack. Radios will have headphones jacks. Get a mixer, it’s got a headphones jack. I don’t think that the standard is going to vanish anytime soon in general.
I like headphones jacks. I have a ton of 1/8" and 1/4" devices and headphones that I happily use. But they weren’t doing it for no reason.
From what I’ve read, the big, driving one that drove them out on smartphones was that the jack just takes up a lot more physical space in the phone than USB-C or Bluetooth. I’d rather just have a thicker phone, but a lot of people wouldn’t, and if you’re going all over the phone trying to figure out what to eject to buy more space, that’s gonna be a big target. For people who do want a jack on smartphones, which invariably have USB-C, you can get a similar effect to having a headphones jack by just leaving a small USB-C audio interface with a headphones jack on the end of your headphones (one with a passthrough USB-C port if you also want to use the USB-C port for charging).
A second issue was that the standard didn’t have a way to provide power (there was a now-dead extension from many years back that is now dead, IIRC for MD players, that let a small amount of power be provided with an extra ring). That didn’t matter for a long time, as long as your device could put out a strong enough signal to drive headphones of whatever impedance you had. But ANC has started to become popular now, and you need power for ANC. This is really the first time I think that there’s a solid reason to want to power headphones.
The connection got shorted when plugging things in and out, which could result in loud sound on the membrane.
USB-C is designed so that the springy tensioning stuff that’s there to keep the connection solid is on the (cheap, easy to replace) cord rather than the (expensive, hard to replace) device; I understand from past reading that this was a major reason that micro-USB replaced mini-USB. Instead of your device wearing out, the cord wears out. Not as much of an issue for headphones as mini-USB, but I think that it’s probably fair to say that it’s desirable to have the tensioning on the cord side.
On USB-C, the right part breaks. One irritation I have with USB-C is that it is…kind of flimsy. Like, it doesn’t require that much force pushing on a plug sideways to damage a plug. However — and I don’t know if this was a design goal for USB-C, though I suspect it was — my experience has been that if that happens, it’s the plug on the (cheap, easy to replace) cord that gets damaged, not the device. I have a television with a headphones jack that I destroyed by tripping over a headphones cord once, because the headphones jack was nice and durable and let me tear components inside the television off. I’ve damaged several USB-C cables, but I’ve never damaged the device they’re connected to while doing so.
On an interesting note, the standard is extremely old, probably one of the oldest data standards in general use today; the 1/4" mono standard was from phone switchboards in the 1800s.
EDIT: Also, one other perk of using USB-C instead of a built-in headphones jack on a smartphone is that if the DAC on your phone sucks, going the USB-C-audio-interface route means that you can use a different DAC. Can’t really change the internal DAC. I don’t know about other people, but last phone I had that did have an audio jack would let through a “wub wub wub” sound when I was charging it on USB off my car’s 12V cigarette lighter adapter — dirty power, but USB power is often really dirty. Was really obnoxious when feeding my car’s stereo via its AUX port. That’s very much avoidable for the manufacturer by putting some filtering on the DAC’s power supply, maybe needs a capacitor on the thing, but the phone manufacturer didn’t do it, maybe to save space or money. That’s not something that I can go fix. I eventually worked around it by getting a battery-powered Bluetooth receiver that had a 1/8" headphones jack, cutting the phone’s DAC out of the equation. The phone’s internal DAC worked fine when the phone wasn’t charging, but I wanted to have the phone plugged in for (battery hungry) navigation stuff when I was driving.
I think this is a case where the corporations were telling people what they wanted rather than people really asking for thinner phones. Same thing with bezels, I don’t know anyone who asked for the screen to go all the way to the edge (or worse, curve around onto the sides). Apple and Samsung said ‘this is what people want’ when in fact it was what their marketing department wanted because they wouldn’t be able to sell the iGalaxy N+1 if it was slightly thicker or heavier than the iGalaxy N.
That’s great and all but I’m not switching to Bluetooth headphones and I’m definitely not going to fiddle around with dongles every time I switch between listening on my phone and my PC. Phones are gigantic anyways; let my have my headphone jack. I don’t think it’s a coincidence that all these smartphone manufacturers that ditched the old standard will happily sell you shiny expensive disposable wireless earbuds.
as someone has been fiddling with dongles for years, it’s not that bad, and you can just permanently connect your headphones to your dongle. the apple dongle is excellent and beyond enough for iems and a lot of headphones. I personally have one dongle + iems for my phone and another dongle + headphones for my PC, and that setup works really well for me. You might want to consider it. Otherwise, those big beefy Bluetooth headphones might be semi-repairable, and there are of course also Fairphone Bluetooth earbuds that are apparently fairly repairable (though I know nothing about those). At least you can replace the batteries and the ear tips or pads, and that’s usually enough to last you a decade with these things.
No. Fuck that. My PC has a headphone jack, and I use it. I don’t have a bunch of extra USB-C ports on the front of my computer. Modern phones have plenty of spaces for headphone jacks. They could put it there, they just don’t want to.
phones are already very full and dense, and a headphone jack is a very large component. plus, the Bluetooth is simply part of the small SoC, it’s a microscopic size. That doesn’t mean I prefer Bluetooth, but it makes some sense.
Great post, thank you.
I lot of great points here, I would be on aboard if phone therefore had two USB-C ports as standard
Exactly! So they can spy on us more!
No, the real reason is it saves a few pennies per phone. They can already spy on us through the internal mic.
Hum…
https://www.xatakaon.com/security/if-you-use-wired-headphones-youre-at-risk-theyre-the-ideal-scenario-for-hackers
The only time a hacker is going to target you like this is if you’re an extremely high value target like a CEO or if you’re in the crosshairs of a nation-state. The average hacker isn’t going to waste this kind of effort to hack someone with $200 in their bank account and no power over anything or anyone.
Double post