Amazon failed to adequately alert more than 300,000 customers to serious risks—including death and electrocution—that US Consumer Product Safety Commission (CPSC) testing found with more than 400,000 products that third parties sold on its platform.

The CPSC unanimously voted to hold Amazon legally responsible for third-party sellers’ defective products. Now, Amazon must make a CPSC-approved plan to properly recall the dangerous products—including highly flammable children’s pajamas, faulty carbon monoxide detectors, and unsafe hair dryers that could cause electrocution—which the CPSC fears may still be widely used in homes across America.

While Amazon scrambles to devise a plan, the CPSC summarized the ongoing risks to consumers:

If the [products] remain in consumers’ possession, children will continue to wear sleepwear garments that could ignite and result in injury or death; consumers will unwittingly rely on defective [carbon monoxide] detectors that will never alert them to the presence of deadly carbon monoxide in their homes; and consumers will use the hair dryers they purchased, which lack immersion protection, in the bathroom near water, leaving them vulnerable to electrocution.

Instead of recalling the products, which were sold between 2018 and 2021, Amazon sent messages to customers that the CPSC said “downplayed the severity” of hazards.

In these messages—“despite conclusive testing that the products were hazardous” by the CPSC—Amazon only warned customers that the products “may fail” to meet federal safety standards and only “potentially” posed risks of “burn injuries to children,” “electric shock,” or “exposure to potentially dangerous levels of carbon monoxide.”

Typically, a distributor would be required to specifically use the word “recall” in the subject line of these kinds of messages, but Amazon dodged using that language entirely. Instead, Amazon opted to use much less alarming subject lines that said, “Attention: Important safety notice about your past Amazon order” or “Important safety notice about your past Amazon order.”

Amazon then left it up to customers to destroy products and explicitly discouraged them from making returns. The e-commerce giant also gave every affected customer a gift card without requiring proof of destruction or adequately providing public notice or informing customers of actual hazards, as can be required by law to ensure public safety.

Further, Amazon’s messages did not include photos of the defective products, as required by law, and provided no way for customers to respond. The commission found that Amazon “made no effort” to track how many items were destroyed or even do the minimum of monitoring the “number of messages that were opened.”

  • Waldowal@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    22
    ·
    edit-2
    4 months ago

    Maybe unpopular opinion, but I’m on the fence about this. I slightly subscribe to the conspiracy theory that many “certified” products are just ways to stifle competition while also justifying higher prices for “certified” products.

    Take UL listed electronics for example. Sure, that might mean something on a full computer full of electronics, but a lamp is two fucking wires and a bulb. It’s not complicated. Even confirming proper metals are used to prevent shrinking and expansion is not complicated. But the same $15 lamp is $100 once it’s UL certified. The math doesn’t add up.

    Like I said: On the fence. Maybe it’s the best way to ensure safe products, but it also seems like a great system for lining specific peoples pockets.

    EDIT: Jesus people, read my post before you get all triggered. I’m not saying shit products don’t exist.

    • Wizzard@lemm.ee
      link
      fedilink
      English
      arrow-up
      22
      arrow-down
      1
      ·
      4 months ago

      You clearly haven’t seen how bad “no-consequences cheap” can be with even simple electronics. Your lamp, for example:

      Melting (under-spec or poor construction) AC wiring, poor material for the cord, switch or socket.

      Melting / burning lampshade (yes, even with LEDs).

      Electrocution risk - Loose connections, easily broken plug or lamp socket, switch, inappropriate (conductive) materials.**

      And that’s not even considering larger-design problems - Lamps that are prone to falling over (and breaking, or melting other things), lamps that flex but not too much or they break exposing problems above, assemblies that aren’t reasonably child-proof, RF interference even.

      The race to the bottom without rules is a dangerous place for the consumer expecting a bare minimum guarantee of fitness while inviting these products into their home, not to mention those most often buying the cheapest option may be the most vulnerable.

      • Waldowal@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        11
        ·
        4 months ago

        Dear Mr. High & Mighty, I’ve actually seen all those things - on UL certified devices.

        But again, not my point. My point was a lamp isn’t complicated enough for the UL to charge so much that the price goes up 10x. If they are charging that much, there should be tons of competitors trying to get a piece of that pie. If they aren’t charging alot, then many of the products on Amazon, that are often certified by authorities in other countries, would also get UL certified. It has all the hallmarks of a racket.

    • Duamerthrax@lemmy.world
      link
      fedilink
      English
      arrow-up
      21
      arrow-down
      2
      ·
      4 months ago

      but a lamp is two fucking wires and a bulb. It’s not complicated.

      And yet, companies can and will cut corners whenever they can. Using too thin of wire or the wrong type of plastic can cause a fire. Cheap switches, bad insulators for the bulb socket are also things that they’ll cut corners on.

      • Waldowal@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        7
        ·
        4 months ago

        That’s not really the point I was going for. I’m not saying bad companies won’t make shit products. I’m just pointing out a lamp doesn’t require alot of effort for the UL to certify, so it can’t justify a 10x increase in cost. But they must be charging a ton or more companies would just get their products certified.

        • Fosheze@lemmy.world
          link
          fedilink
          English
          arrow-up
          11
          ·
          4 months ago

          I don’t know where you’re getting the idea that UL certified goods are super expensive. UL is the bare minimum. I have a $10 UL certified lamp on my desk right now. Certifications like TUV and similar are the more expensive ones.

        • 🐍🩶🐢@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          4 months ago

          UL certification can mean different things, depending on the product and type of mark. It also isn’t that expensive to get UL listed as it isn’t like every single item you produce is tested. Each product you design is tested, but not each item you produce.

          There are 3/4 types. UL listed, UL recognized, and UL classified. Certified is newer and more stringent.

          • Recognized is mostly for machinery and components within machinery. It isn’t terribly difficult to get, but annoying. I have dealt with this type as we design and build electrical panels. Usually you hand the design to a panel builder and they will get it certified before delivery.
          • Listed is for products and appliances, and is fully tested for safety. This applies to most consumer electronics.
          • Certified Enhanced is also for products, and you can read up on it here: https://www.ul.com/news/qa-uls-enhanced-certification-mark
          • Classified is for products and is half ass tested. All it means is that some requirements for UL were tested and passed, but not all.

          If a product is Classified by UL, this can mean its testing meets the particular requirements for a single test with a published result, but has nothing to do with all the other tests that may form part of a Standard (i.e., UL 181).

          As for pricing for UL listed, it can be just a few grand for a single product. Not much when you are selling thousands. I am sure Classified is even cheaper. I wonder how many of these cheap ass lamps say Classified.